Support > Software & Drivers
Select Search automatically for updated driver software. Euromex microscopen bv driver download for windows 10. Select Update Driver. If Windows doesn't find a new driver, you can try looking for one on the device manufacturer's website and follow their instructions. Reinstall the device driver. In the search box on the taskbar, enter. Windows 10 64 bit, Windows 8.1 64 bit, Windows 8 64 bit, Windows 7 64 bit, Windows Vista 64 bit, Windows 2008, Windows XP 64 bit, Windows 2003.
Cutting Plotters
Software & Drivers
Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE7000-130AP, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page. Gosafe port devices driver download for windows 10.
Drivers
| Cutting Plotters | Windows Driver | ||||||
|---|---|---|---|---|---|---|---|
| Windows 7 (32-bits Edition) | Windows 8.1 (32-bits Edition) | Windows 10 (32-bits Edition) | Windows 7 (64-bits Edition) | Windows 8.1 (64-bits Edition) | Windows 10 (64-bits Edition) | Cprrespon- ding model | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS662 (v3.80) | OPS662 (v4.00) | OPS662 (v3.80) | OPS662 (v4.00) | CE6000 | ||
| CE6000-120AP | OPS628 (v10.20) | OPS628 (v10.30) | OPS628 (v10.20) | OPS628 (v10.30) | CE6000 | ||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS662 (v3.80) | OPS662 (v4.00) | OPS662 (v3.80) | OPS662 (v4.00) | FC8600 | ||
| FC2250-60 FC2250-120 FC2250-180 | FC2250 | ||||||
| FC4500-50 FC4510-60 FC4550-50 | FC4500 | ||||||
| CE2000-60 CE2000-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | CE2000 | ||
| CE2000-120AP | CE2000 | ||||||
| CE3000-40 CE3000-60 CE3000-120 | CE3000 | ||||||
| CE3000-120AP | CE3000 | ||||||
| CE3000Mk2-60 CE3000Mk2-120 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | CE3000Mk2 | ||
| CE5000-60 CE5000-120 | OPS662 (v3.00) | OPS662 (v3.00) | CE5000 | ||||
| CE5000-120AP | OPS628 (v10.20) | OPS628 (v10.20) | CE5000 | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC2230 | ||
| FC2240-60 FC2240-120 FC2240-180 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC2240 | ||
| FC3600-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC3600 | ||
| FC4200-50 FC4200-60 FC4210-60 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC4200 | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC5100 | ||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | FC5100 | ||||||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC7000 | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | FC7000 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS662 (v3.00) | OPS662 (v3.00) | FC8000 | ||||
| FC612-09 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC612 | ||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
Softwares
| Cutting Plotters | Cutting Plotter Controller | ROBO Master Pro | D-Cut Master | |||
|---|---|---|---|---|---|---|
| Windows 7 / 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS676 (v1.40B) | N/A | N/A | |||
| Firmware version 1.60 is required (CE6000 Firmware v2.61) Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01) | ||||||
| CE6000-120AP | N/A | N/A | N/A | |||
| Firmware version v1.50 is required (CE6000-120AP Firmware v2.00) User manual for CE6000-120AP (CE6000AP-UM-152-01) | ||||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC2250-60 FC2250-120 FC2250-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC4500-50 FC4510-60 FC4550-50 | ||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | |||
| CE2000-120AP | N/A | N/A | N/A | |||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | |||
| CE3000-120AP | N/A | N/A | N/A | |||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | |||
| CE5000-60 CE5000-120 | OPS664 (v2.20B) | OPS661 (v4.60) | N/A | N/A | ||
| CE5000-120AP | N/A | N/A | N/A | |||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC3600-120 | N/A | N/A | N/A | |||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | |||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | |||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS664 (v2.20B) | N/A | N/A | N/A | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC612-09 | N/A | N/A | OPS639 (v2.12) | N/A | ||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
Softwares
Epicnpc Driver Download For Windows 10
| Cutting Plotters | Cutting Master 4 | Graphtec Pro Studio | |
|---|---|---|---|
| Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | Macintosh OS10.7 - 10.15 | Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | |
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| FC4500-50 FC4510-60 FC4550-50 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| Cutting Plotters | Cutting Master 2 | Cutting Master 3 | Graphtec Studio | ||||
|---|---|---|---|---|---|---|---|
| Windows 7/ 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Macintosh OS10.4 - 10.10 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.5 -10.11 macOS 10.12 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.6 -10.15 | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| CE6000-120AP | N/A | N/A | N/A | ||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 2.10 or later is required (FC8600 Firmware v3.10) | |||||||
| FC2250-60 FC2250-120 FC2250-180 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.90 or later is required (FC2250 Firmware v4.50) | |||||||
| FC4500-50 FC4510-60 FC4550-50 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 1.92 or later is required (FC4500 Firmware v2.70) | |||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | ||||
| CE2000-120AP | N/A | N/A | N/A | ||||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | ||||
| CE3000-120AP | N/A | N/A | N/A | ||||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | ||||
| CE5000-60 CE5000-120 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows> | Graphtec Studio for Macintosh |
| When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00) When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40) | |||||||
| CE5000-120AP | N/A | N/A | N/A | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | N/A | ||||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | N/A | ||||
| FC3600-120 | N/A | N/A | N/A | ||||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | N/A | ||||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | ||||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | ||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.10 or later is required (FC8000 Firmware v3.50) | |||||||
| FC612-09 | N/A | N/A | N/A | ||||
Notes/Explanations:
Epicpc Driver Download For Windows
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
- 5.
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.